Web design online - Click the Execute tab. If you want to
Click the Execute tab. If you want to run a special command or script before or at the point of connection or disconnection, you can add the full path to the command or script in the appropriate box. (You will typically leave these blank.) 8. Click the Accounting tab. If you need to account for the amount of traffic being received or sent over this connection, you can click the Enable Accounting button on this tab. You must then select the Available rules, based on your country and type of service. This feature is more useful outside of the United States, where billing for Internet service is done differently. 9. Click OK. The new account should appear in the Account Setup box. 10. Click the Device tab. Select the modem device that will be used for the connection. Your modem may already be linked to the /dev/modem device (whether it is on COM1 or COM2). To specifically set the modem to one of those ports, you could select /dev/ttyS0 for COM1, or select /dev/ttyS1 for COM2 (and so on). 11. Click OK to exit from the kppp Configuration window. 12. From the main kppp window (which should still be on your screen), make sure that your new connection type appears in the Connect to window. The first time you try the connection, click the Show Log Window box. Type the login ID and password for your ISP account. 13. Click Connect. The Login Script Debug window will step through the process of initializing the modem, dialing, and making the PPP connection. If all goes well, you should be able to start browsing the Internet. If the connection fails, skip to the Checking your PPP connection section for information on hunting down the problem. Launching your PPP connection After you have a working PPP connection configured, you can set up that connection to launch easily from the desktop. Here s how: From the GNOME desktop: 1. Right-click Panel and then choose Panel Add to Panel Applet Network RH PPP Dialer from the GNOME menu. When the Choose pop-up window appears, click the interface you want to use and then click OK. 2. You can either start the connection now or not. In either case, after you finish Step 1, an icon appears on the panel that you can click to immediately connect to the ISP (click the green button). From the KDE desktop: 1. Right-click the desktop and choose Create New Link to Application. 2.
From our experience, we can recommend PHP5 Web Hosting services, if you need affordable webhost to host and run your web application.