Net web server - Class C 192.168.0.0 to 192.168.255.255 256 So, for
Class C 192.168.0.0 to 192.168.255.255 256 So, for a small private LAN, the following numbers are examples of IP addresses that could be assigned to the host computers on your network. (You could use any of the network numbers plus host numbers from the table. These are just examples.) 192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5 You could continue that numbering up to 192.168.1.254 on this network, and you could use a network mask of 255.255.255.0. Adding host names and IP addresses When you install Red Hat Linux, you are given the opportunity to add your TCP/IP host name and IP address, as well as some other information, to your computer. You also need to set up a way to reach the computers on your LAN. That s done either by adding all computer names and IP addresses to your /etc/hosts file (described here) or by using a DNS server. Cross-Reference DNS servers are discussed in Chapter 16. If you did not identify your IP address during installation of Red Hat Linux, you can do so at a later time using the Network Configuration window (neat command). This procedure lets you attach a particular IP address to your Ethernet interface, so your computer knows what address to listen for. Note A computer can have more than one IP address because it can have more than one network interface. Each network interface must have an IP address (even if that address is assigned only temporarily). So, if you have two Ethernet cards on your computer (eth0 and eth1), each needs its own IP address. Also, the address 127.0.0.1 represents the local host, so users on the local computer can access services in loopback. To define your IP address for your eth0 interface, follow this procedure: 1. Start the Network Configuration. As root user from a Terminal window, type neat. The Network Configuration window appears. 2. Click the Devices tab. A listing of your existing network interfaces appears. 3. Double-click the eth0 interface. A pop-up window appears, enabling you to configure your eth0 interface. Figure 15-6 shows the Network Configuration window and the pop-up Ethernet Device window configuring eth0.
Note: In case you are looking for affordable and reliable webhost to host and run your business application check Vision php5 hosting services